Squid 配置指令 debug_options
可用版本:
此指令在 Squid 的 v8 版本中不可用。
对于 v5 之前的旧版本，请参阅以上链接页面。
配置详情
| 选项名称 | debug_options |
|---|---|
| 替代 | |
| 要求 | |
| 默认值 | 记录所有关键和重要的消息。 |
| 建议配置 |
|
Logging options are set as section,level where each source file is assigned a unique section. Lower levels result in less output, Full debugging (level 9) can result in a very large log file, so be careful. The magic word "ALL" sets debugging levels for all sections. The default is to run with "ALL,1" to record important warnings. The rotate=N option can be used to keep more or less of these logs than would otherwise be kept by logfile_rotate. For most uses a single log should be enough to monitor current events affecting Squid. |
|