Squid 配置指令 clientside_tos
可用版本:
此指令在 Squid 的 v8 版本中不可用。
对于 v5 之前的旧版本，请参阅以上链接页面。
配置详情
| 选项名称 | clientside_tos |
|---|---|
| 替代 | |
| 要求 | |
| 默认值 | none |
| 建议配置 |
|
Allows you to select a TOS/DSCP value for packets being transmitted on the client-side, based on an ACL. clientside_tos ds-field [!]aclname ... Example where normal_service_net uses the TOS value 0x00 and good_service_net uses 0x20 acl normal_service_net src 10.0.0.0/24 acl good_service_net src 10.0.1.0/24 clientside_tos 0x00 normal_service_net clientside_tos 0x20 good_service_net Note: This feature is incompatible with qos_flows. Any TOS values set here will be overwritten by TOS values in qos_flows. The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or "default" to use whatever default your host has. Note that only multiples of 4 are usable as the two rightmost bits have been redefined for use by ECN (RFC 3168 section 23.1). The squid parser will enforce this by masking away the ECN bits. This clause only supports fast acl types. See https://wiki.squid.org.cn/SquidFaq/SquidAcl for details. |
|